In this article
State of the art sensing technologies to improve your quality assurance
 3 min read

One of the main challenges of food industry is to reduce manufacturing costs and food waste. Conventional strategies of quality assurance can be effective, but are expensive and not always flawless; batch failures and reworks are frequent. For these reasons, the quality of the food products should already be incorporated into process development and design and not by post-production quality testing. This requires tools and systems which enable continuous analysis and control of processes, including real-time sensing and analysis of both raw materials and in-process materials. This way, the product quality is controlled during processing and not determined after production.

 

Multi Sensor Device

The EU-funded MUSE-Tech project addressed this challenge by integrating three novel sensing technologies into a Multi Sensor Device (MSD). The MSD is designed in such a way that it allows additional input from already installed sensors in production lines. Three MSD’s were tested at both pilot plant scale and at industrial level in three case studies: bread, fried potato chips and beer production.

The food industry must move on from conventional end of the process to real-time product quality control

Distributed Temperature Sensing

The first sensing technology, Distributed Temperature Sensing (DTS), allows real-time and accurate monitoring of complex temperature profiles in harsh environments. The DTS sensors proved to be robust for the harsh conditions in all three tested cases: during dough fermentation, the frying oil of the continuous deep fryers and inside the brew kettle during beer production. 

Quasi Imaging Vis-NIR

The second technology, Quasi Imaging Vis-NIR (QIVN), provides information about sugar content in raw potatoes, oil quality during frying (contamination with for instance mineral oils), flour composition and wort characteristics. The sensor is designed to work at high speed and gather data simultaneously from different points of the process. Although the quality of the data needs more investigation, the QIVN provided satisfactory results at pilot plant and industrial level, especially in the case of the frying process.

Photoacoustic Sensor

The third sensor, Photoacoustic Sensor (PAS),has been positively tested for the bread process under pilot plant and industrial condition. PAS monitors CO2, ethanol and humidity in the dough prover simultaneously. For frying and brewing, promising results were also observed but further refinements need to be implemented at industrial level. The raw data from the sensors was processed in real-time using statistical software tools. It provided users with information that they use to control their food production processes.

Industrial potential

The MSD has showed strong potential to achieve more consistent levels of quality during processing. This will allow food producers to reduce manufacturing costs and food waste. Before it can be used, the MSD needs to be tailored to monitor and control specific food processes. Get in touch if you want to receive more information.

 

MUSE-Tech an EU funded initiative

MUSE-Tech stands for:  Multi Sensor Technology for management of food processes.

For whom: Food producing small and medium-sized enterprises across Europe, especially beer, bakery, potato chips producers.

Objective: Integrating three high-end sensing technologies in a versatile Multi Sensor Device (MSD), for real-time monitoring (on-line or in-line) of multiple parameters associated with the quality and the chemical safety of raw and in-process materials.

Reason: The food industry needs quick responses, ideally in real-time, when it comes to the quality and safety of raw materials and processes foods.

How: Three novel sensors were integrated to create a so-called Multi Sensor Device (MSD). This device is able to monitor complex temperature profiles, CO2, ethanol, humidity, sugar content in potato, oil quality during frying, flour composition and wort characteristics during processing under harsh conditions. The MSD’s were tested at both pilot plant and industrial level in 3 cases studies: bread production, fried potato chips and beer production.

Areas of interest: Food processing, food quality, food safety, distributed temperature sensing (DTS), quasi imaging visible-near infrared (QIVN), photoacoustic spectroscopy (PAS), bakery, brewing, potato crisps. 

When: From October 2013 to September 2016.

Funded by: European Union.

Partners: 12 European research institutions, SMEs, Large Industry in 6 European countries: Spain, United Kingdom, Netherlands, Finland, Czech Republic and Italy.

Coordination: Massimo Castellari, IRTA, Spain.

Contact: Massimo.Castellari@irta.cat

Website: www.musetech.eu

Want to get more information about this topic?
Get in touch
Contact person:
Massimo Castellari
Function:
Researcher
Company:
Agri-food and Technology Research Institute (IRTA)
Country:
Spain


Subscribe for the newsletter
or Login
‹ Home Sign up, it's free
Sectors
Meat
Dairy
Bakery
Global
Tags
Sustainability Product development Process technology Health Consumer awareness Safety Innovation Trend Legislation Networking



yes
no











All fields with * are mandatory